MX-M232D (AR-D36/D37) 5 - 2
4) Make a hole for connector.
• The machine (1-tray model)
Cut out the portion shown in the illustration with nippers or the like.
• The machine (2-tray model)
Press the portion shown in the illustration with a screwdriver or the
like to remove it.
5) Remove the second cassette rear cover.
Remove the rear cover which is attached to the 250-sheet paper feed
unit.
Remove the rear cover (upper stage) from the 2x250-sheet paper feed
unit.
6) Install the machine onto the 250-sheet paper feed unit.
Put the machine on the 250-sheet paper feed unit, and fix with the fixing
plates and the screws.
• The machine (1-tray model) + 250-sheet paper feed unit
• The machine (2-tray model) + 250-sheet paper feed unit
To Next Page
Loading...
Need help?
General
