Sharp MX-M202D - Page 15

MX-M232D (MX-FX13/XB17) 6 - 1
[6] MX-FX13/MX-XB17
1. Unpacking
<Before installation>
• For improvement of workability, some description in this manual as
well as components and accessories may change without prior notice.
In this case, refer to the service manual.
A. MX-FX13
B. MX-XB17
2. Installation (MX-FX13 and MX-XB17)
1) Remove the rear cabinet.
Remove screws. Remove the rear cabinet and the rear cabinet cover.
2) Connect the bundled AC harness to the power PWB of the
machine.
Note: Connect the connector with the insulation tube of the AC harness
to the power PWB of the machine.
Parts included
FAX Expansion Unit: 1
line cable: 1
FAX keyboard: 1
Screws (S tight): 4
Writing label:4
Line Adapter: 1
(Australia/
New Zealand only)
FCC label: 1
(USA/Canada only)
A-TICK label: 1
(Australia/
New Zealand only)
Screws (S tight): 6
(Taiwan/Brazil/
South Africa only)
FAX power harness: 1
Ferrite Core: 2
(Taiwan/Brazil/
South Africa only)
Parts included
FAX Mounting Unit: 1
USB holder: 1
Rear cabinet cover: 1
USB Expansion harness: 1
Screws (S tight): 4
AC harness: 1
(Taiwan/Brazil/
South Africa only)
AC harness: 1
Turn off the main switch of the machine and then remove the power
plug of the machine from the outlet.
(1)
(1)
(1)
(2)
(1)
(1)
(1)
(1)
(1)
(3)
(4)