Sharp MX-M283N

MX-M503N MX-FN11 9 – 2
B. Removal of the protection material
1) Remove the fixing tapes and protection material.
2) Open the front upper door, and remove the fixing tapes and
protection material.
3) Remove the screws and remove the fixing material for the
paper exit tray. (four positions)
C. Check the packed items
1) Check that all the items are included in the package.
* The punch position labels (No.11 and No.12) should be kept at
hand since they will be necessary when installing the punch unit.
No. Names of bundles Quantity
1 Binding head round tapping M4x8 2
2 IT tapping M4x20 2
3 Binding head M4x12 4
4 Step screw B 2
5Rail 1
6 Rail reception sheet metal 1
7 Connection fixture F (for x3) 1
8 Connection fixture R (for x3) 1
9 Staple position label (For scanner) 1
10 Staple position label (For RSPF/DSPF) 1
11 Punch position label (For scanner) 1
12 Punch position label (For RSPF/DSPF) 1
13 Guide mylar 2
14 Cushion (S) 1
15 Cushion (M) 1
16 Cushion (L) 1
123
645
789
11 12
10
14
13
16
15
X3
X3