Sharp MX-M3071 User Manual

18
BEFORE USING THE MACHINE
PLACING ORIGINALS
The automatic document feeder can be used to automatically scan many originals at once, and this saves you the
trouble of manually feeding each original.
For originals that cannot be scanned using the automatic document feeder, such as a book or a document with notes
attached, use the document glass.
USING THE AUTOMATIC DOCUMENT FEEDER
When using the automatic document feeder, place the originals in the document feeder tray.
Make sure an original has not been placed on the document glass.
USING THE DOCUMENT GLASS
Take care that your fingers are not pinched when closing the automatic document feeder.
After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be
copied black, causing excessive use of toner.
Set the orientation of the image to ensure that the orientation of the placed original is correctly recognized.
For details, see the User's Manual.
Adjust the original guides to
the width of the originals.
Place the originals face up with the edges aligned
evenly.
The indicator line indicates approximately
how many originals can be placed. The placed
originals must not be higher than this line.
Place the original face down.
Align the top left corner of the
original with the tip of the
mark in the far left corner of the
glass.
Place the original
face down.

Sharp MX-M3071 Specifications

General

Print Technology	Laser
Print Speed	30 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	30 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Max Paper Size	A3
Duplex Printing	Yes
Monthly Duty Cycle	100, 000 pages
Automatic Document Feeder	Yes
Connectivity	USB, Ethernet
Memory	5 GB
Hard Disk Drive	500 GB
Operating System Compatibility	Windows, Mac, Linux
Fax Resolution	Up to 400 x 400 dpi
Paper Capacity	Standard: 650 sheets (550-sheet tray + 100-sheet bypass tray); Maximum: 6, 300 sheets