24
General Problems
I DON'T KNOW HOW TO ADJUST THE TIME THE
MACHINE ENTERS ENERGY SAVE MODE
Check Solution
Set the time the machine enters
energy save mode in the Energy Save
settings of setting mode.
■ Set the time the machine enters energy save mode in the Energy Save settings
of setting mode.
Set the time the machine enters Preheat Mode.
"Settings (administrator)"
→
[System Settings]
→
[Energy Save]
→
[Eco Setting]
→
[Preheat Mode Setting]
Set the time that Auto Power Shut-Off takes place
"Settings (administrator)" → [System Settings] → [Energy Save]
→ [Eco Setting] → [Auto Power Shut-Off Timer]
I FORGOT THE ADMINISTRATOR PASSWORD
Check Solution
Was the administrator password
changed from the factory default
setting?
■ Contact your dealer or nearest SHARP Service Department.
For the factory default administrator password, see "TO THE ADMINISTRATOR
OF THE MACHINE" in Start Guide. After changing the password, take special
care to remember it.
I DON'T KNOW WHOM TO CONTACT FOR
MAINTENANCE AND SERVICE
Check Solution
Please check the customer support
information.
■ Contact your dealer or nearest SHARP Service Department.
To Next Page
Loading...
Need help?
General
