16
Configuring Wireless LAN:
Before configuring the MFP device onto a customer network (using Infrastructure Mode), the following
information from the customer’s network will be required:-
SSID [Name of Wireless network].
Security Type [WEP, WPA, WPA2 etc].
Level of Encryption (if necessary) [AES or TKIP].
Wireless Password.
Procedure:
1. Press the System Settings button on the Operation Panel:-
2. Select Admin Password and enter the Administrators’ password:-.
3. From the Network Settings - Connection Type Switching menu, select the preferred Wireless
connection type (Wired, Wireless (Infrastructure Mode) or Wired+Wireless (Ad-Hoc Mode).
Select OK and reboot the MFP:-
To Next Page
Loading...
