Sharp MX-M316N

SHARP
SD CARD REPLACEMENT PROCEDURE
29
Only limited data that is stored on the SD Card can be backed up and reinstalled following replacement or
SD card failure. If the SD Card is operating normally before replacement, backup the data and then
reinstall the data onto the replacement SD Card.
The SD Card includes the following data:-
Partition
Number
Stored Data
Backup
Method
Data
Reinstall
Method
L-101
ICU
firmware
data
ICU firmware (Boot/Main)
lang.sfu
graph.sfu
Boot animation
Boot (CN)
ARM9 firmware
-
SIM49-01
(BOOT
cannot be
installed
again.)
S-101
ICU
firmware
fixed data
(Pre-install)
Font
-
SIM49-01
Web help
-
SIM49-01
SPDL
-
SIM49-01
Option FontROM
-
SIM49-01
S-102
ICU
firmware
fixed data
(Mirror)
Same as above
-
SIM49-01
S-105
System
Data
Setting value data file (System setting/SIM setting
data (Image quality adjustment)/FAX Soft SW)
SIM56-02
SIM56-02
S-103
User Data
System setting data
SIM56-02
SIM56-02
Key operator custom setting data
(Data changed from the default)
System setting - data
backup - device cloning
FAX reception data (Power shut off & paper
empty)
-
-
FEP learning data (Japanese/ Chinese)
-
-
Firmware update data (differential between new
and old) (For FSS)
-
-
Account management information/ User
authentication data
SIM56-02
SIM56-02
Home screen customize data
System setting - data
backup - device cloning
I-101
FAX
reception
data
FAX/Internet Fax reception image data
SIM66-62
-
Cont’d