Check Image Quality (Copy Mode):-
If NG, perform the following adjustments as required:-
Sim 46-02 Copy Density Adjust. (600dpi).
Sim 46-09 SPF Copy Density Adjust.
Check Image Quality (Print Mode):-
Sim 64-05 PCL Density Test Page.
Sim 64-06 PS Density Test Page [MX-PK11].
PERIPHERAL / OPTION CONFIGURATION
HDD EXPANSION KIT – MX-HD14/HD15
Sim 56-02 Backup User Data to USB memory.
Sim 56-11 Copy Data from SD Card (original) to HDD.
Sim 56-12 Copy Data from HDD to SD Card (MX-HD14/HD15).
Sim 56-02 Import User Data from USB memory.
Sim 66-02 Fax SW Setting (Destination).
Sim 66-10 Fax Memory Clear (For Extended Memory).
Sim 66-39 Fax Destination Set.
FINISHER OPTION – MX-FN26
Sim 26-65 Finisher Alarm Mode:-
Limit number of Copies in staple mode (ON/OFF).
USB WIRELESS ADAPTOR – MX-EB13
Sim 26-50 Activate Wireless Set, E: 0 = Disable, 1 = Enable.
EXTERNAL ACCOUNTING MODULE – MX-AMX3
Sim 55-03 Auto clear function before Copy job execution:-
SSW 1-5 0 = Disable, 1 = Enable.
Sim 55-03 Continuous print mode (job queuing for OSA):-
SSW 24-7 0 = Disable, 1 = Enable.
Sim 22-06 Data Simulation Print.
Device Clone & Storage Backup.
To Next Page
Loading...
