PRINTER
41
PRINTING ON ENVELOPES
The bypass tray can be used for envelope printing.
(1) Click the [Paper Source] tab.
(2) Select the envelope size from "Output
Size".
When "Output Size" is set to [DL], "Paper Type" is also
automatically set to [Envelope].
(3) Select [Bypass Tray] from the "Paper Tray".
4
Click the [Print] button.
Printing begins.
Set the paper type of the bypass tray to [Envelope]
and load an envelope into the bypass tray.
► Loading envelopes
(page 24)
!mxm6070_us_sg.book 41 ページ ２０１８年３月５日 月曜日 午後４時５２分
To Next Page
Loading...
Need help?
General
