EasyManua.ls Logo

Sharp MX-M365N - Page 1001

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NETWORK STATUS
The Network Status screen shows the general status information and the statuses
relevant to, TCP/IP, NetWare, EtherTalk, and NetBIOS protocols.
Item Description
General Displays the information common to the network.
Link Status: Displays the data transfer rate of the NIC and
cable information.
Duplex Mode: Displays the duplex mode of the NIC.
Hardware Address: Displays the MAC address of the NIC.
Print Status on Startup: Displays whether or not status is
printed upon startup.
Device Name: Displays the device name.
Domain: Displays the domain name.
Reception Level (Max. 100): Displays the reception level of
the wireless LAN.
TCP/IP Displays the current status of the TCP/IP protocol.
IPv4 Settings: Displays the IPv4 protocol settings.
DHCP/BOOTP: Selects whether or not the IP address
is obtained from the DHCP/BOOTP server.
RARP: Displays the status of the RARP protocol.
IPv4 Address: Displays the IPv4 address.
Subnet Mask: Displays the current subnet mask.
Default Gateway: Displays the current default
gateway.
IPv6 Settings: Displays the IPv6 status.
DHCPv6: Displays the status of the DHCPv6 server.
Manual Address: Displays the IPv6 address that has
been manually specified.
Default Gateway: Displays the current default
gateway.
Link-Local Address: Displays the link-local address.
Stateless Address 1: Displays the stateless address.
Stateless Address 2: Displays the stateless address.
Stateful Address: Displays the stateful address.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1001 of 1441 3/17/2016 7:14 AM