E-mail Address Enter the e-mail address that is used in the sender list and for LDAP
authentication (up to 255 characters).
Extended Platform To enable authentication and tracking over a firewall, configure settin
gs to use the extended platform.
Use Proxy Server Set to use a proxy server for authentication and tracking.
My Folder Store a folder to be used for document filing as the dedicate user fold
er (or My folder). A stored folder can be selected, or you can create a
nd specify a new folder.
Authentication Settings
*1
Select either [Login Locally] or [Network Authentication] (when LDA
P is enabled) for authentication.
User Group Set a group to which the user belongs.
Up to 8 groups can be assigned.
Authentication Server When the [Network Authentication] is selected, select the server to
be used for user authentication from the LDAP server list that is stor
ed using Setting mode (Web version).
Pages Limit Group Specify the page limit for the user by selecting one of the stored pag
e limit groups. The factory default setting is [Unlimited].
For more information, see "PAGE LIMIT GROUP LIST".
Authority Group Specify the user authority by selecting one of the stored authority gr
oups. The factory default setting is [User].
For more information, see "AUTHORITY GROUP LIST".
Favorite Operation Group The favorite operation group is displayed when the user logs in. The f
actory default setting is [Following the System Settings].
To change the settings, select [User Control] in Setting mode (Web v
ersion).
Default Billing Code Set the Main Code and Sub Code when the user logs in.
The factory default setting is [Not Set].
*1 It is not displayed when "User Number" is selected for the authentication method.
*2 It is displayed only when "User Number" is selected for the authentication method.
*3 Not required when network authentication is used, as the password stored in the LDAP
server is used.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1013 of 1441 3/17/2016 7:14 AM