Following the System Settings: systemsetti
ngs
My Folder myfolder Folder name of user folder stored in the ma
chine.
Do not enter if the default folder is specifie
d.
Rename the properties that the machine obtains from the LDAP server as follows. In
"Setting mode", select [Network Settings] → [LDAP Settings]. From the Global Address
Book setting screen that is displayed, select [Linkage with User Control Function] and
then select [Pages Limit Group], [Authority Group], [Favorite Operation Group] and [My
Folder].
The [Pages Limit Group], [Authority Group], and [Favorite Operation Group] information
that is registered in each machine determines the authority and settings that the user is
actually granted. To use this function to ensure that users are granted the same authority
and settings on any machine, register the [Pages Limit Group], [Authority Group], and
[Favorite Operation Group] information with the same authority so that they will be
registered in each machine using the same registration numbers.
For [My Folder], register the folder having the same name in [Custom Folder] in each
machine.
The directory information of the LDAP server that is used cannot be changed from the
machine. Consult the administrator of the LDAP server.
Users auto-registered
When access control is enabled and login is performed by network authentication, the user
information in the LDAP server is automatically registered in the machine.
The information stored is as follows:
Item Description
User Name Information is acquired from the LDAP server.
*
Initial 1
Index User1
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1023 of 1441 3/17/2016 7:14 AM