MAIN CODE LIST
You can display a list of main codes to search for, register, correct, or delete a main code.
[Search] key
Searches for a main code.
[Add] key
Adds a new main code.
List
Displays a list of registered main codes. Selecting each main code displays the window to
correct the main code.
[Delete] key
Set the check box on the left of each main code to , then tap the [Delete] key; the
selected main code is deleted.
Register a main code
Tapping the [Add] key displays the registration window. A total of up to 2,000 main and sub codes
can be registered.
For information on setting items, refer to "List of setting items".
After the setting has been completed, tap the [Submit and Register Next] key; you can continuously
register the next main code. To end the registration process, tap the [Submit] key.
Correct a main code
Selecting a main code from the list displays the window to correct the main code.
For information on setting items, refer to "List of setting items".
After the setting has been completed, tap the [Submit] key; you can apply the corrected contents
and complete processing.
Search for a main code
Enter the main code and main code name, then tap the [Search] key; the search result is displayed.
List of setting items
Item Description
Main Code Enter the main code Specify the code using up to 32 single-byte
characters.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1052 of 1441 3/17/2016 7:14 AM