ADMINISTRATION SETTINGS
Change the billing code setting.
Use Billing Code
Switch whether to enable or disable a billing code.
Use Code Settings
A use code is automatically assigned when no billing code is entered. Specify the code using up to
32 single-byte characters.
Take Over Billing Code at Mode Transition
If this function is enabled, the billing code entry window is not displayed at the time of mode
transition.
Disable Change of Billing Code.
If this function is enabled, you cannot register, edit, or delete a billing code.
In addition, you cannot directly type in a billing code in the billing code entry window.
Apply Use Code While Logged in with Device Account
If this function is enabled, a use code is always set while you are logging in with device account.
Exception Setting for Billing Code Function
The billing code entry window is displayed when the external application that is set to enable is
started.
The setting items are as follows.
Application Name registered as Standard Application
Web Browse
*
* Displayed when the Web Browsing Expansion Kit is installed.
Billing Code Display Name Setting
You can change the main code or sub code name displayed in the billing code entry window or billing
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1056 of 1441 3/17/2016 7:14 AM