Tray Settings
Paper Tray Paper Type Size
Tray 1 Plain, Pre-Printed, Rec
ycled, Letter Head, Pre
-Punched, Color, Heav
y Paper 1
*1
, User Type
Auto-Inch (11"x17", 8-1/2"x14", 8-1/2"x11", 8-
1/2"x11"R, 7-1/4"x10-1/2"R), 8-1/2"x13-2/5"
(216 mm x 340 mm), 216 mm x 343 mm (8-1/2"x1
3-1/2"), 5-1/2"x8-1/2"R, A5R, 8K, 16K, 16KR, A
uto-AB (A3, A4, A4R, B4, B5, B5R, 216 mm x 330
mm (8-1/2"x13"))
Tray 2 (when a stand
/500/2x500/3x500/
500&2000 sheet pap
er drawer is installed)
Tray 3 (when a stand
/2x500 or stand/3x5
00 sheet paper draw
er is installed)
Tray 4 (when a stand
/3x500 sheet paper
drawer is installed)
Tray 3 (when a stand
/500&2000 sheet pa
per drawer is installe
d)
Plain, Pre-Printed, Rec
ycled, Letter Head, Pre
-Punched, Color, User
Type
8-1/2"x11", A4
Tray 4 (when a stand
/500&2000 sheet pa
per drawer is installe
Plain, Pre-Printed, Rec
ycled, Letter Head, Pre
-Punched, Color, User
8-1/2"x11", A4
If the paper size specified here is different from the size of paper that is loaded into
a tray, a problem or misfeed may occur when printing.
To change the paper size in a tray, see "BEFORE USING THE MACHINE".
Paper properties such as "Fixed Paper Side" are automatically set when the paper
type is selected. The paper tray properties cannot be changed in this screen.
If [System Settings] in "Setting mode" → [Device Control] → [Disabling of Tray
Settings] is selected, the tray settings (except for the bypass tray) cannot be
configured.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1065 of 1441 3/17/2016 7:14 AM