Disabling of Optional Paper Drawer
This setting is used to disable the optional paper drawer, such as when it malfunctions.
Disabling of Tray Setting
This setting is used to prohibit tray settings (except for the bypass tray).
Disabling of Finisher
This setting is used to prohibit the use of finisher or saddle finisher, such as when it
malfunctions.
Disabling of Offset
Disables an offset.
Disabling of Stapler
This setting is used to prohibit the use of staple, such as when the staple of finisher or
saddle finisher malfunctions.
Saddle Stitch Position Adjust
This setting is used to adjust the staple position (saddle fold position) when a saddle
finisher is installed and the saddle stitch function is used.
The value can be adjusted in increments of 0.2 mm within a range of +/-5.0 mm from the
home position of each paper size.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1092 of 1441 3/17/2016 7:14 AM