EasyManua.ls Logo

Sharp MX-M365N - Page 1097

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INITIAL STATUS SETTINGS
The following settings are related to copying.
Default settings selected with these settings apply to all functions of the machine (not just
the copy function).
The copier settings are reset to the initial state when the [Power] button is turned on,
when the [CA] key is tapped, or when the auto clear interval has elapsed. These settings
are used to change the default settings for copy mode.
The following settings can be changed:
Item Description
Paper Tray Specify the paper tray that is selected by default.
Exposure Type Configure default exposure mode settings.
Copy Ratio Specify the copy ratio that is selected by default.
2-Sided Copy Configure the 2-sided mode settings that are selected by default.
If this setting is used to change the default setting for the duplex fun
ction to any setting other than "1-Side to 1-Side" and the duplex fu
nction or automatic document feeder fails or is disabled, the setting w
ill revert to "1-Side to 1-Side".
Output Set the print output method and output tray that are selected by defa
ult.
Offset Set whether or not offset is performed in the default settings.
Return to the Defaults This returns all items to the factory default settings.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1097 of 1441 3/17/2016 7:14 AM