EasyManua.ls Logo

Sharp MX-M365N - Page 1103

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DEFAULT SETTINGS
Settings related to the printer function can be configured.
Printer condition settings are described below.
Prohibit Notice Page Printing
Disables to print a notice page.
Prohibit Test Page Printing
Disables to print the test page.
When this setting is enabled, [System Settings] → [List Print (User)] → [Printer Test
Page] in "Setting mode" cannot be used to print test pages.
A4/Letter Size Auto Change
When printing an 8-1/2" x 11" (letter) size image, this setting allows A4 size paper to be
used if 8-1/2" x 11" size paper is not loaded.
Print Density Level
This lightens or darkens the print density. The print density can be adjusted to five levels.
Bypass Tray Settings
Enable Detected Paper Size in Bypass Tray
This is used to prohibit printing when the paper size specified for a print job is different
from the paper size inserted in the bypass tray.
Enable Selected Paper Type in Bypass Tray
This is used to prohibit printing when the paper size specified for a print job is different
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1103 of 1441 3/17/2016 7:14 AM