Heavy paper 29 lbs. to 110 lbs. cover (106 g/m
2
to 300 g/m
2
)
Thin paper 13 lbs. to 16 lbs. (55 g/m
2
to 59 g/m
2
)
Types of paper that can be set in each tray
Trays 1 - 4 (Tray 2 - 4 when a Stand/500/2x
500/3x500 sheet paper drawer is installed. Tra
y 2 when a Stand 500&2000 sheet paper draw
er is installed)
Tray 3 - 4 (Sta
nd/500&2000 s
heet paper dra
wer)
By
pas
s
Tray 5 (l
arge cap
acity tra
y)
Plain
Paper
Permitted Permitted Per
mitt
ed
Permitted
Heavy
paper
1
*
Permitted - Per
mitt
ed
-
Heavy
paper
2
*
- - Per
mitt
ed
-
Heavy
paper
- - Per
mitt
-
Recycled paper, colored paper and pre-punched paper must meet the same specifications as
plain paper.
Before using any paper, consult the dealer or SHARP Service Department.
For detailed information on the sizes and types of paper that can be loaded into each
tray of the machine, see "SPECIFICATIONS" in the "Quick Start Guide" and
"TRAY SETTINGS" in "Setting mode" "User's Manual".
Recycled paper, colored paper and pre-punched paper must meet the same
specifications as plain paper.
Before using any paper, consult the dealer or SHARP Service Department.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
111 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
