EasyManua.ls Logo

Sharp MX-M365N - Page 1111

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
was stored with the image.
Default Exposure Settings
This is used to set the default exposure settings for scanning a document in image send
mode. Select [Auto] or [Manual]. If you select [Manual], set the exposure to one of 5
levels.
Default Original Image Type
Select the original type beforehand to enable scanning at a resolution suitable for the
original (only in scan mode and USB memory device scan mode).
The following settings can be configured.
Text/Printed Photo
Text/Photo
Text
Photo
Printed Photo
Map
Sharpness
This is used to emphasize the outline of image and show it clearly for scanning a document
in image send mode. It can be set to any of 5 levels.
Contrast
This is used to adjust the contrast of image for scanning a document in image send mode.
It can be set to any of 5 levels.
Sending the same image sent in Fax/I-Fax mode
This is used to enable or disable the default setting. Enable this function to send the same
image simultaneously using fax mode or Internet fax mode with another mode.
If this function is disabled, an image specified with each Scan Setting is sent to E-mail,
FTP, Desktop, and Network Folder.
Be sure to press Next Address Key ( ) before selecting the next address
This function forces the user to tap the [Next Address] key before entering the next
When the exposure is set to [Auto], a default original type cannot be selected.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1111 of 1441 3/17/2016 7:14 AM