EasyManua.ls Logo

Sharp MX-M365N - Page 1113

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Time Specified Output of Received Data
This function is available when the Received Data Image Check Setting is enabled.
* This is displayed when a facsimile expansion kit or Internet fax expansion kit is installed. If "Time
Specified Output of Received Data" is set to , this setting is grayed out.
If "Change Password" or "Hold Setting for Received Data Print" is set to , the password entry
field is grayed out.
ENABLE/DISABLE SETTINGS
Settings to Disable Registration
This is used to prohibit the storing of destinations. Storing from the machine, storing from
Setting mode (Web version), and storing from the PC can each be separately prohibited.
Disable Registering Destination from Operation Panel
Disables address control from the machine.
Configure the setting for each of the following items:
Group (Direct Entry)
Group (Address Book)
Contacts
Select All: Selects all items.
Clear Checked: Clears all selections.
Disable Registering Destination on Web Page
Disables to store the destination from Setting mode (Web version).
Configure the setting for each of the following items:
Group (Direct Entry)
Group (Address Book)
Individual
Select All: Selects all items.
Clear Checked: Clears all selections.
Disabling of Registration/Deletion of Program
This is used to prohibit the deletion and changing of image send settings stored in job
programs.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1113 of 1441 3/17/2016 7:14 AM