SCAN SETTINGS
Settings related to the image send function (Scan, Internet fax, etc.) can be configured.
Scan Settings
The following settings are related to the scanner.
Default Sender Set
The information stored here is used if you do not specify [Reply to] in the send settings
when performing Scan to E-mail.
Sender Name
Enter a default sender name (maximum of 20 characters).
Source Address
Enter a default reply address (maximum of 64 characters).
Default Color Mode Settings
Select a default color mode setting for both color and black & white in e-mail address,
network folder, FTP and Desktop. Specify "Scanner Common" unless E-mail is specified.
Auto (Mono2, Grayscale
*
), Full Color, Grayscale, Mono 2
* When scanning a black and white original with the color mode set to [Auto]
Disable Change of B/W Setting in Auto Mode: Disables black & white settings from the
base screen when the color mode is set to Auto.
Initial File Format Setting
Specify the initial file format for sending a file in E-mail, Network Folder, FTP, or Desktop
mode. Specify "Scanner Common" unless E-mail is specified.
For an explanation of settings related to the fax function, see "IMAGE SEND SETTINGS -
FAX FUNCTIONS."
If only the sender name is stored, it will not be used as sender information.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1117 of 1441 3/17/2016 7:14 AM