INTERNET FAX SETTINGS
Settings related to the image send function (Scan, Internet fax, etc.) can be configured.
Default Settings
Configures the default settings for Internet fax.
Auto Wake Up Print
When the [Power] button is "Off" (but the main power switch is " ") and an Internet fax
is received, this function activates the machine and prints the fax.
When this function is disabled, received Internet faxes are not printed until the ([Power]
button) is switched "On".
Compression Setting
This is used to set the default compression mode for Internet fax transmission.
The following settings can be configured.
MH (G3)
MMR (G4)
Speaker Volume Setting
Adjusts the volume of fax receive signals and communication error signals heard through
the speaker.
A fax receive signal sounds after the machine checks the mail server and retrieves
received faxes. A communication error signal sounds when a delivery failed e-mail is
received from the destination Internet fax machine.
Original Print on Transaction Report
When a transaction report is printed, this is used to print part of the first page of the
For an explanation of settings related to the fax function, see "IMAGE SEND SETTINGS -
FAX FUNCTIONS."
These settings can be configured when the Internet fax expansion kit is installed.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1121 of 1441 3/17/2016 7:14 AM