Body Text Print Select Setting
Image files attached to Internet faxes are normally printed. This setting can be enabled to
also have the e-mail body text (subject and message) printed.
This setting also applies to printing of the body text of e-mail messages without file
attachments.
Send Setting
These settings are used to configure the settings for Internet fax.
I-Fax Reception Report On/Off Setting
This setting is used to request a reception report when an Internet fax is sent.
I-Fax Reception Report Request Timeout Setting
The duration of time that the machine will wait for a reception report from the destination
machine can be set by any number from 1 hour to 240 hours in increments of 1 minute.
Number of Resend Times at Reception Error
The number of resend attempts when an error message is received from an I-Fax recipient
can be set to any number from 0 to 15.
If you only select the "Print Daily at Designated Time" setting and the number
of recorded transactions reaches 200 before the specified time, each new
transaction will delete the oldest transaction (the oldest transaction will not be
printed).
The Transaction Report can be printed out manually as needed.
See "LIST PRINT (ADMINISTRATOR)" in Setting mode.
A maximum of 5 pages of body text can be printed.
This setting is only effective when "I-Fax Reception Report On/Off Setting" is enabled.
This setting is only effective when "I-Fax Reception Report On/Off Setting" is enabled.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1123 of 1441 3/17/2016 7:14 AM