*
Envel
ope
- - Per
mitt
ed
-
"Heavy paper 1" is heavy paper up to 110 lbs. index (220 g/m
2
), "Heavy paper 2" is
heavy paper up to 140 lbs. index (256 g/m
2
), and "Heavy paper 3" is heavy paper up to
110 lbs. cover (300 g/m
2
).
Setting orientation of the print side
The setting orientation varies for the print side of paper , depending on the tray used. For
"Letter Head" and "Pre-Printed", set the paper in the reverse orientation.
Tray In normal status With letter head or pre-printed paper set
Trays 1 - 4 Facing up Facing down
Bypass tray and tray 5: Facing down Facing up
Paper that cannot be used
Special media for an ink jet printer
(fine paper, glossy paper, glossy film, etc.)
Carbon paper or thermal paper
Pasted paper
Paper with clips
Paper with fold marks
Torn paper
Oil-feed transparency film
Thin paper less than 15 lbs (55 g/m
2
)
Heavy paper as thick as 110 lbs. cover (300 g/m
2
) over
Irregularly shaped paper
When [Disabling of Duplex] is set for "Letter Head" or "Pre-Printed", set the print side in
the same orientation as for the ordinary operation.
To set [Disabling of Duplex]:
In "Setting mode", select [System Settings] ā [Device Control] ā [Disabling of Duplex].
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
113 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
