STORING/CALLING OF SYSTEM SETTINGS
You can reset the current Setting mode settings to the previously stored settings or to
the factory default settings.
Restore Factory Defaults
Restores the current settings (you have selected in Setting mode) to the factory default
settings. If you wish to create a record of the current settings before restoring, print the
current settings by selecting [System Settings] in "Setting mode" → [List Print
(Administrator)]".
Store Current Configuration
Stores the currently configured Setting mode in the machine memory.
The stored settings will be retained even if the [Power] button is turned off. To retrieve
the stored settings, use "Restore Configuration" below.
Items not stored
Network Settings: These are not stored as unexpected settings may cause damage
to the network.
Product Keys: Product Keys are not stored as reissue of keys may be necessary.
Restore Configuration
Restores the settings stored with " Store Current Configuration".
The current settings are replaced by the retrieved settings.
When settings are changed, the changes will take effect after the machine is restarted. To
restart the machine, see "TURNING ON THE POWER".
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1152 of 1441 3/17/2016 7:14 AM