E-MAIL PRINT SETTINGS
When an e-mail is sent to the address of this machine, a file attached to this mail is
printed out.
Item Description
E-mail Print Select this option to use the E-mail printing.
POP3 Server Enter the IP address or host name of the POP3 server.
Port Number Enter the port number of the POP3 server. The default setting is port
110.
POP Authentication The authentication protocol (including APOP) is used for authenticati
on to the POP3 server.
User Name Enter the user name. The special user account is required for e-mail
printing.
Password Enter the password. To change the password, select [Change Passw
ord] and enter the new password in the text box.
Check Interval Enter the polling interval for the POP3 server. The default setting is fi
ve minutes.
Enable SSL If set to , the POP over SSL communication or the POP over TL
S communication by STLS command is enabled. This requires the ser
ver to support the POP over SSL communication or the STLS comm
and.
To allow the POP over SSL communication, set the "Port Number" t
o the POP over SSL communication port number.
To allow POP over TLS communication, set the "Port Number" to th
e same port number as for the normal POP3 communication.
Connection Test Tap the [Execute] button to test the connection to the POP3 server.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1209 of 1441 3/17/2016 7:14 AM