PORT CONTROL
Port Control
Enable or disable main system ports, set the port numbers, and tap the [Store] key.
The following ports can be configured.
Server Port Client Port
HTTP
HTTPS
FTP PRINT
Raw Print
LPD
IPP
IPP-SSL
Tandem Output Receive
PC Scan
Remote Operation Panel
SNMPD
Telnet
NBT/WINS
JCP
RARP
SMTP
WSD
USB-Device Expansion (when
Application Communication
Module or External Account
Module is enabled)
Sharp OSA (when Application
Communication Module or Ext
ernal Account Module is enabl
ed)
HTTP
HTTPS
HTTP
HTTPS
FTP
FTPS
SMTP
SMTP-SSL
POP3
POP3-SSL
SNMP-TRAP
Notify Job End
LDAP
LDAP-SSL
SMB/WINS
SNTP
mDNS
Tandem Output Send
Data Backup Send
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1229 of 1441 3/17/2016 7:14 AM