EasyManua.ls Logo

Sharp MX-M365N - Page 1246

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
program in the memory box are necessary for the other
machine to send a fax to the machine by F-code
confidential transmission.
Relay Broadcast: Store a memory box for F-code relay
broadcast transmission.
Up to 30 destinations can be stored to forward the
received data. The sub-address and passcode that you
program in the memory box are necessary for the other
machine to send a fax to the machine by F-code relay
request transmission.
Memory Box Name Enter a name (maximum of 18 characters) for the memory box.
Sub Address/Passcode Enter a sub-address and passcode. A maximum of 20 digits can be en
tered for each sub-address and passcode.
Separate a sub-address and passcode by a slash ("/").
Items displayed when storing a confidential memory box
Print PIN Set a "Print PIN" for confidential reception. Enter a 4-digit number.
Items displayed when storing a relay broadcast memory box
Recipients Select the end recipients of the relay broadcast. Select the recipient
s from the address book.
Select the recipient from the address book: Selects an
address from the address book.
Destination Entry: An address that is not stored in the
address book can be directly entered. Enter the address in
the same way as when storing an address for a mode.
Address Review: This displays a list of the selected
recipients. Addresses can be deleted from this list if
needed.
When programming a new memory box, a sub-address that is already programmed for
another box cannot be used. However, the same passcode can be used for more
than one memory box.
[ ] and [#] cannot be used in a sub-address.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1246 of 1441 3/17/2016 7:14 AM