FAX DATA RECEIVE/FORWARD - FAX
FUNCTIONS
This section explains settings for fax reception and forwarding.
Fax Settings
Item Description
Receive Settings Set the fax reception method.
Auto Reception: When a call comes in, the machine rings
and then automatically begins fax reception.
Manual Reception: Used when an existing extension
telephone is connected to the machine. You can answer to
a phone call first, and then receive a fax by manual
operation.
Multiple Set Print Specify whether or not two or more copies of received faxes will be p
rinted. The number of copies can be set with the "Fax Output Setting
s."
Staple Specify whether or not stapling is performed. (Only when a finisher is
installed)
A binding style can be set with the "Fax Output Settings."
Forward Received Data When the machine cannot print because it is out of paper or out of to
ner, received faxes can be forwarded to another previously stored fax
machine.
If there is no forwarding data or if the destination is not registered, no data is forwarded.
If "Hold Setting for Received Data Print" is enabled, you are prompted to enter a
password. Enter the correct password using numeric keys.
If some pages of a fax that is being forwarded were successfully printed, only those
pages that were not printed will be forwarded.
A forwarded fax becomes a fax transmission job. If transmission does not take place
because the transmission was canceled or an error occurred, the fax will be held in
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1248 of 1441 3/17/2016 7:14 AM