EasyManua.ls Logo

Sharp MX-M365N - Page 1250

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IMAGE SEND SETTINGS - FAX FUNCTIONS
You can select the image send settings of fax functions.
Fax Settings
Fax Default Settings
The fax settings can be enabled or disabled to suit the needs of your workplace.
Dial Mode Setting
Select the appropriate setting for your telephone line type.
Dial Mode Setting
Select the line type from the list.
Auto Select
Select this after the line has been connected to have the machine automatically detect
whether your line is a pulse dial line or a tone dial line.
Auto Wake Up Print
When the [Power] button is "Off" (but the main power switch is " ") and a fax is
received, this function activates the machine and prints the fax.
When this function is disabled, received faxes are not printed until the [Power] button is
switched "On".
Pause Time Setting
Changes the length of pauses inserted in fax numbers.
If a hyphen (-) is entered when dialing or storing a fax number, a pause of 2 seconds is
inserted.
It can be set between 1 and 15 seconds, in every 1 seconds.
Fax Dest. Confirmation Mode
This setting specifies whether or not a destination verification message is displayed when
sending a fax in order to prevent accidental transmission to the wrong destination.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1250 of 1441 3/17/2016 7:14 AM