EasyManua.ls Logo

Sharp MX-M365N - Page 1257

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
the received image.
When [Outside the Received Image] is selected, the received image is reduced and the
date and time of reception is printed in the blank area that results.
A3 RX Reduce
When an A3 size fax is received, this function reduces the fax to ledger (11" x 17") size.
Fax Output Settings
These settings are used to select the number of copies and output tray for received faxes.
When a finisher is installed, the finisher tray can be selected as the output tray and
stapling can be selected.
Output tray
Select the output tray for received faxes.
Number of Prints
Set the number of copies of received faxes that are printed to any number from 1 to 99.
Staple Settings
When a finisher is installed, set the position at which received faxes are stapled.
Paper Size
When a finisher is installed, select the paper used for printing of received faxes.
The [Outside the Received Image] cannot be selected for the reception date and time print
setting if "Auto Receive Reduce Setting" is not enabled.
When this setting is enabled, ledger (11" x 17") size faxes are also reduced.
This setting can only be used when the [Multiple Set Print] and [Staple] checkboxes
are selected in "Fax Settings".
Up to 50 pages can be stapled. (When the paper is oriented horizontally, up to 30
sheets can be stapled.)
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1257 of 1441 3/17/2016 7:14 AM