EasyManua.ls Logo

Sharp MX-M365N - Page 1272

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TWO-SIDED PRINTING DOES NOT TAKE
PLACE
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the " "position. Wait at least 10 seconds
and then turn the main power switch to the " "position. After the main power indicator
color changes to green, press the [POWER] button.
Point to check Solution
Does the paper type setting of the sel
ected tray specify a type of paper that
cannot be used for 2-sided printing?
Check "Paper Tray Settings" in the setting mode.
If the [Disable Duplex] checkbox is , two-sided printing
using that tray will not be possible. Change the paper type s
etting to a type that can be used for 2-sided printing.
"Setting mode" → [Paper Tray Settings] → [Tray Registra
tion]
Are you using a special size or type of
paper?
For the paper types and sizes that can be used for t
wo-sided printing, see "SPECIFICATIONS" in Quick
Start Guide.
Have functions been disabled by the a
dministrator?
Check with your administrator.
Some functions may have been disabled in the setting mod
e. Check with your administrator.
When user authentication is enabled, the functions that yo
u can use may be restricted in your user settings. Check w
ith your administrator.
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1272 of 1441 3/17/2016 7:14 AM