THE MACHINE DOES NOT BEGIN FAX
RECEPTION
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the " "position. Wait at least 10 seconds
and then turn the main power switch to the " "position. After the main power indicator
color changes to green, press the [POWER] button.
Point to check Solution
Has the reception mode bee
n set to [Manual Reception]
in the setting mode?
Set the reception mode to [Auto Reception].
When the reception mode is set to [Manual Reception], the machine
will not receive faxes automatically.
"Setting mode" → [System Settings] → [Fax Data Receive/Forward
] → [Fax Settings] → [Receive Settings]
Is little free memory remainin
g?
Increase the amount of free memory.
The amount of free memory can be increased by printing faxes receiv
ed by confidential reception and other password-protected received
data, and by deleting data stored in memory boxes.
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1291 of 1441 3/17/2016 7:14 AM