EasyManua.ls Logo

Sharp MX-M365N - Page 1294

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
THE VOLUME IS TOO LOW
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the " "position. Wait at least 10 seconds
and then turn the main power switch to the " "position. After the main power indicator
color changes to green, press the [POWER] button.
Speaker
Ringer Volume
Line Monitor
Fax Receive Complete Signal
Fax Send Complete Signal
Fax Communication Error Signal
Point to check Solution
Has the volume been set to a lo
w level in the setting mode?
Ask your administrator to set the volumes in [Speaker Setti
ngs] to a higher level.
"Setting mode" → [System Settings] → [Image Send Settings]
→ [Fax Settings] → [Default Settings] → [Speaker Settings]
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1294 of 1441 3/17/2016 7:14 AM