A ONE-TOUCH INDIVIDUAL KEY OR GROUP
KEY CANNOT BE EDITED OR DELETED
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the " "position. Wait at least 10 seconds
and then turn the main power switch to the " "position. After the main power indicator
color changes to green, press the [POWER] button.
Point to check Solution
Is the key included in a progr
am key?
Remove the key from the program and then edit or delete the key. (If
the key is included in multiple programs, it must be removed from all
programs.)
[Call Program] → [Delete] in the action panel for each mode
If the key is included in multiple programs, print the Program List in [
Sending Address List] in the setting mode. The list will show where i
ndividual and group keys are stored.
"Setting mode" → [System Settings] → [List Print (User)] → [Send
ing Address List] → [Program List]
Have functions been disabled
by the administrator?
Check with your administrator.
Some functions may have been disabled in the setting mode. Check
with your administrator.
Has your administrator enable
d a function that prevents edi
ting/deleting?
Check with your administrator.
If your administrator has enabled settings such as [Default Address
Setting] and [Inbound Routing Settings], keys cannot be edited or re
moved.
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1314 of 1441 3/17/2016 7:14 AM