A FILE NAME IS CUT OFF
If you are unable to solve a problem using the solutions in this manual, press the [Power]
button and then turn the main power switch to the " "position. Wait at least 10 seconds
and then turn the main power switch to the " "position. After the main power indicator
color changes to green, press the [POWER] button.
Point to check Solution
Was the file name store
d in the advanced trans
mission settings during
a scan or Internet fax tr
ansmission?
If the name was stored in the advanced transmission settings before Quic
k File or File settings were configured, that name will be used for the stor
ed file. If the number of characters in the name exceeds the maximum nu
mber of characters allowed for a Quick File name (30 characters), charact
ers after the 30th character will be discarded.
When the background color of the job status display at the upper right corner of the touch
panel is not gray, do not switch off the main power switch or unplug the power plug. This may
damage the hard drive or cause the data being stored or received to be lost.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1324 of 1441 3/17/2016 7:14 AM