EasyManua.ls Logo

Sharp MX-M365N - Page 1332

Sharp MX-M365N
1441 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
THE PAPER MISFEEDS
Point to check Solution
Is a torn piece of paper remai
ning in the machine?
Make sure all paper is removed.
- REMOVING MISFEEDS
Is too much paper loaded in t
he tray?
Make sure that the stack of paper in the tray is not higher tha
n the indicator line.
Are multiple sheets feeding a
t once?
Fan the paper well before loading it.
Are you using paper that is n
ot within the specifications?
Use SHARP-recommended paper.
Using paper that is for other models or special paper that is not supp
orted may result in misfeeds, creases, or smudges.
- "SUPPLIES" in "Quick Start Guide"
For paper that is prohibited or not recommended, see "APPLICABLE
PAPER TYPES".
Has the paper in the tray abs
orbed moisture?
If you will not be using paper in a tray for a long time, remove the pap
er from the tray and store it in a bag in a dark and dry location.
Are the bypass tray guides a
djusted to the width of the p
aper?
Adjust the bypass tray guides to the width of the paper.
Is the bypass tray extension
guide pulled out?
When loading large-size paper, pull out the extension guide.
Is the bypass feed roller dirty
?
Clean the surface of the bypass feed roller.
- CLEANING THE BYPASS FEED ROLLER
Is 5-1/2" x 8-1/2" (A5) siz
e paper loaded?
When loading 5-1/2" x 8-1/2" (A5) size paper, place the pap
er in the horizontal (5-1/2" x 8-1/2"R (A5R)) orientation.
Is the paper size specified? If you are using a non-standard size, be sure to specify the p
aper size.
If the size of paper loaded into a tray was changed, be sure to check
the paper size setting.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1332 of 1441 3/17/2016 7:14 AM