PAPER DOES NOT FEED FROM THE PAPER
TRAY
Point to check Solution
Is the paper loaded correctly into the paper
tray?
Set the guides to the size of the paper.
Make sure the height of the paper does not exceed th
e indicator line.
Are restrictions placed on the trays that ca
n be used in each mode (copy, print, fax, Int
ernet fax, and document filing)?
Check the settings in [Paper Tray Settings] and
see if checkmarks appear in the checkboxes of e
ach mode ([Feeding Approved Job]).
Functions without a checkmark cannot be used for pri
nting using that tray.
"Setting mode" → [Paper Tray Settings] → [Tray Reg
istration] → [Feeding Approved Job]
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1334 of 1441 3/17/2016 7:14 AM