FOLDING DOES NOT TAKE PLACE
Point to check Solution
Did the administrator enable the [
Disabling of Duplex] setting?
The paper folding function cannot be used when [Disabling of D
uplex] is enabled in the setting mode. Check with your administr
ator.
"Setting mode" ā [Device Control] ā [Disabling of Duplex]
Are you using a paper type that h
as a specific front and reverse sid
e?
The folding function cannot be used with pre-printed paper, lett
erhead paper, or other paper that has specific front or reverse s
ides.
When folding paper, use a paper type such as plain paper that do
es not have specific front or reverse sides.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
1349 of 1441 3/17/2016 7:14 AM