this is selected.
PKI Certificate Check:
Specify whether or not PKI certificate authentication is
performed in addition to domain user authentication.
Certificate Validation Option
Specify whether or not the user certificate is validated by the spec
ified OCSP server.
Combo Card Option Select CAC or PIV for the card that is used.
Force Retention
Specify whether or not all the printing jobs are always held in the D
ocument Filing folder.
Procedures for configuring PKI and OCSP
Follow the steps below to configure PKI authentication.
Install all certificates in the trust chain of the CA certificate that issued the
user certificate.
On your computer, prepare the certificate file that you wish to install.
Click the [Import] button in "Security Settings" → [CAC Certificate
Management] in the Web page menu.
Select the certificate file that you wish to install and click the [Execute] button.
Configure the Kerberos server settings to perform PKI certificate
authentication. (Kerberos must be setup to perform PKI certificate
authentication.)
Open "Network Settings" → [Service Settings] → [Kerberos] in the Web page
menu.
Set the "KDC Server", "Port Number", and "Realm".
Adjust the machine time and Kerberos server time.
Select "Clock Adjust" from "System Settings" → [Default Settings] in the Web
page menu, and set the correct time and time zone.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
195 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
