Sharp MX-M365N - Page 204

and cannot be selected.
FILE SEARCH AND RETRIEVAL
File manipulation
When "Scan to Self" or "Scan to Site" is enabled in "E-mail Setting" in the system
settings (administrator), the only option that can be used when "Send" is selected for the
operation is "Scan to Self" or "Scan to Site".
Image Send
Manipulating jobs in the job status screen
When CAC authentication is used, only the jobs of the currently logged in user can be
manipulated.
Other Notes
This section explains other settings that are useful for CAC authentication and procedures
for deleting user information.
LDAP and SMTP
SMTP and Kerberos
To configure this setting, select [Network Settings] → [Ser
vice Settings] in the Web page menu.
LDAP
To configure this setting, select [Network Settings] → [LD
AP Settings] in the Web page menu.
LDAP-Global address book
To configure this setting, select [Network Settings] → [Ge
neral Settings] in the Web page menu
To Control Ports (Disable/Enable ports)
To configure this setting, select [Security Settings] → [Port Control] in the Web page
menu.
Clearing all Data
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
204 of 1441 3/17/2016 7:14 AM