USING THE AUTOMATIC DOCUMENT FEEDER
FOR COPYING
Place the original in the document feeder tray of the automatic document
feeder, and tap the [Preview] key.
AUTOMATIC DOCUMENT FEEDER
Check the paper to be used.
Make sure that the desired paper (tray) is selected.
To change the paper (tray), tap the [Paper Select] key.
SELECTING THE PAPER TRAY FOR COPYING
Tap the [Start] key to start copying.
When making only one set of copies, you do not need to specify the number of
copies.
Depending on the size of the placed original, there may be cases where the same size of
paper as the original is not selected automatically. In this event, change the paper tray
manually.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
217 of 1441 3/17/2016 7:14 AM
To Next Page
