MAKING A PROOF COPY
(PROOF COPY)
Overview
This function makes a proof copy before printing the specified number of copies. Check
the preview image with a proof copy. If necessary, change the setting. Using this
function stores the scanned original in the machine, saving you the trouble of
re-scanning the original in the changed setting.
Proof copy flow
Proof Copy must be specified before scanning the original.
If Proof Copy is executed while the machine is printing another job, the job in
progress is interrupted, and a proof copy is printed preferentially. The interrupted
job will resume after proof copying has been completed.
However, if proof copy is executed during printing of a job for which both 2-sided
printing and staple function are enabled, the proof copy will be printed after the job
in progress is finished.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
301 of 1441 3/17/2016 7:14 AM
To Next Page
