Close the front cover.
Replacing the staple cartridge (saddle stitch unit)
Before starting this procedure, remove all output from the output tray of the saddle
finisher. Do not replace removed output back in the output tray.
Open the side cover.
Make a proof copy in staple sort function to verify that stapling takes place correctly.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
31 of 1441 3/17/2016 7:14 AM
To Next Page
Loading...
