COPYING 11" x 17" (A3) ORIGINALS WITH NO
EDGE CUT-OFF
(12" X 18" (A3) FULL BLEED COPY)
Overview
This feature lets you copy an entire 11" x 17" (A3) size original at full size with no image
cut-off at the edges. 12" x 18" (A3W) size paper is used, which is slightly larger than
11" x 17" (A3) size.
Operation
Tap the [Others] key, and tap the [12" x 18" (A3) full bleed copy] key.
A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.
Place 12" x 18" (A3W) paper into the bypass tray.
Pull out the extension guide, adjust it to the width of 12" x 18" (A3W) paper, and
place the paper on the bypass tray.
After loading 12" x 18" (A3W) paper into the bypass tray, configure the bypass
tray settings as explained in "MAKING COPIES USING THE BYPASS TRAY".
The 12" x 18" (A3) full bleed copy must be specified before scanning the original.
The staple and punch functions cannot be used.
To cancel 12" x 18" (A3) full bleed copy setting:
Tap the [12" x 18" (A3) full bleed copy] key to uncheck it.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
321 of 1441 3/17/2016 7:14 AM
To Next Page
