Sharp MX-M365N - Page 412

PRINTING ON ENVELOPES IN A WINDOWS
ENVIRONMENT
Overview
The bypass tray can be used for envelope printing.
Operation
Select the envelope size in the settings of the application ("Page Setup" in many applications) and
then perform the following steps.
Click the [Paper] tab and select the envelope size from the "Paper Size"
menu.
Select [Bypass Tray] from the "Paper Source" menu of "Paper Selection".
For the types of paper that can be used in the bypass tray, see "APPLICABLE
PAPER TYPES".
For the procedure for loading paper in the bypass tray, see "LOADING PAPER
INTO THE BYPASS TRAY".
For more information on the procedure for loading paper, see "PAPER FEEDING
IN A WINDOWS ENVIRONMENT".
It is recommended that you carry out a test print to check the print result before
using an envelope.
When using media such as envelopes that can be loaded only in a specific
orientation, you can rotate the image 180 degrees. For more information, see
"ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees) ".
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
412 of 1441 3/17/2016 7:14 AM