PRINTING ON ENVELOPES IN A MACINTOSH
ENVIRONMENT
Overview
The bypass tray can be used for envelope printing.
Operation
Select the envelope size in the settings of the application ("Page Setup" in many applications) and
then perform the following steps.
Select the envelope size from the "Paper Size" menu on the page setup
screen and click the [OK] button.
For the types of paper that can be used in the bypass tray, see "APPLICABLE
PAPER TYPES".
For the procedure for loading paper in the bypass tray, see "LOADING PAPER
INTO THE BYPASS TRAY".
For more information on the procedure for loading paper, see "PAPER FEEDING
IN A MACINTOSH ENVIRONMENT".
When using media such as envelopes that can be loaded only in a specific
orientation, you can rotate the image 180 degrees. For more information, see
"ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees) ".
It is recommended that you carry out a test print to check the print result before
using an envelope.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
414 of 1441 3/17/2016 7:14 AM
To Next Page
