PRINTING AND SENDING SIMULTANEOUSLY
Overview
This function prints data created in an application from the machine and simultaneously
sends the data to the addresses stored in the machine.
This function allows you to complete two tasks, printing and sending, with one operation
from the printer driver.
Operation
Windows
Click the [Job Handling] tab and click the [Print and Send] button.
Select the [Print and Send] checkbox so that the checkmark appears.
Click the [Get Address Book] button.
From the "Address Book" list, select the address to which you wish to send
the data, and click the [Add] button to add the address to the "Destination"
Addresses must be stored in advance in the machine. For more information, see
"STORING CONTACTS".
You must complete the preparatory steps for using each sending function of the
machine. For more information, see the explanation of each sending function.
This function is available in a Windows environment.
This function can be used when the PCL6 printer driver is used.
You cannot print and send data simultaneously when [System Settings] in
"Setting mode" → [Printer Settings] → [Default Settings] → [Prohibit utilize
sending function at print] is selected.
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
496 of 1441 3/17/2016 7:14 AM
To Next Page
