The icon appears to the left of keys of files that can be printed.
The icon is displayed to the left of keys of folders on the FTP server.
To display a folder or a file in a folder, tap this key.
Select the print conditions.
If you have selected multiple files in step 4, you can select only the number
of prints.
If you have selected a file that includes print conditions (i.e., PCL, PS, or
XPS files) in step 4, the settings will be applied.
Tap the [Start] key.
Printing begins after the selected file is downloaded.
A total of 100 keys of files and folders can be displayed.
Tap to move up one folder level.
When you move down a folder level by tapping a folder key, appears.
Tap this key to return to the file or folder name selection screen.
Tap the [File or Folder Name] key to change the order of the files and folders
displayed on the screen. Each time the key is tapped, the order changes between
ascending and descending.
When the [Print on Glossy Paper] checkbox is selected, [Paper Select] is set to [Glossy
Paper] (bypass tray) and [Output Resolution] is set to [600 dpi (High Quality)].
USER'S MANUAL | MX-M365N/MX-M465N/MX-M565N USER'S ... http://siica.sharpusa.com/portals/0/downloads/Manuals/MX-M365N-M...
501 of 1441 3/17/2016 7:14 AM
To Next Page
